Skip Ribbon Commands
Australian Government: National Measurement InstituteAustralian Government: National Measurement Institute
National Measurement Institute
      

Certificates of Approval

On successful completion of the pattern approval process you will be issued with a certificate of approval  (also known as a pattern approval certificate) which is valid for five years and contains an approval number. Certificates of approval are usually comprised of three sections:

  • a certificate which consists of the advice and conditions of approval
  • a technical schedule which describes the pattern and any variants
  • a test procedure which specifies the tests (which are not covered by other published test procedures) for verification and the maximum permissible errors

To find a particular certificate:

  • use the Search facility (top right)
  • enter the certificate of approval number (use a solidus to separate the numbers, e.g. 12/1/20) in the Publication Search (in the top navigation bar)
  • select the correct approval category (below) and sub-category (where certificates are listed in numerical order)
 

 Recently Updated Documents

 
S750 Weigh-More Solutions Model WMS-3950EGTC Digital Indicator
  • PDF - 659.63 KB
6/4C/276 A&D Model SE-30KAM Weighing Instrument
  • PDF - 584.55 KB
S776 Flintec Model RC3D GEN2–30t–C4 Digital Load Cell
  • PDF - 517.94 KB
14/3/41 Sanchuan DN20 Ultrasonic Water Meter
  • PDF - 1.03 MB
S779_R0 Holi Scale Model AS130 Bending Beam Load Cell
  • PDF - 342.53 KB